2.5> SENSOR ALARM BEEP
ON: Under sensor alarm mode, the DVR beeps when it is activated to record.
OFF: No beeping.
2.6> HDD FULL BEEP
ON: The DVR will beep when the running HDD is 99% full. The beeping continues
unless the HDD is full.
OFF: No beeping.
2.7> RECORD MESSAGE DISPLAY
ON:
The related messages are displayed on the screen.
OFF: Not being displayed.
3> SENSOR ALARM CONNECTION
The recorder has 4 sensor input terminals on the rear panel. In the sensor alarm mode
any sensor is activated, the recorder will start to record the images from the
corresponding channel. The correspondence chart is as follows.
4> HARD DISK DRIVE INSTALLATION
4.1> Front Panel Description
4.2> Power Indicator and HDD Access indicator
When power is turned on, the indicator will display the following¡ G
HDD Access Indicator
Item
Power Indicator
Sensor
Corresponding Channel
S1
Channel 1
S2
Channel 2
S3
Channel 3
S4
Channel 4
1. HDD Access indicators
2. Power indicator
3. Active-handle
4. Handle
5. Cartridge frame
6. Key lock
Indicator
Green LED
Amber LED
13
Version 1.2