Table of Contents
Advertisement
Event Only: Video will be recorded only when events occur.
Resolution: Select recording resolution based on video format.
NTSC: 720x480 / 720x240 / 360x240
PAL: 720x576 / 720x288 / 360x288
Record Quality: Select an image quality for recording. There are five different qualities available: Superior,
High, Standard, Basic and Low. A higher image quality uses more HDD space.
Normal Speed: Frame rate in images per second (IPS) for continuous recording. The speed is limited to
the maximum recording rate of the ERS-4 (displayed in the bottom left corner) divided by the number of
installed cameras. If the resolution option is changed, the unit of this field will also be changed.
Recording capacity for all 4/8cameras (shown next to the Normal Speed field): The number here
indicates the remaining recording capacity available for all 4/8 cameras. When this number is positive, it
means there is still recording capacity. If this number is negative, it means the recording capacity has
been exceeded, and the user must lower Normal Speed or Resolution. This number must be positive
before saving the changes. Otherwise, a pop-up window will display "Total FPS exceed maximum
recording rate, discard changes!" and the settings for all cameras will return to previous values.
Event Speed: Frame rate in images per second (IPS) for event recording.
PTZ ID: When using a PTZ Camera, this ID must match the ID used by the connected camera in order to
control the camera using the ERS-4. Click "On" to confirm selection, "Off" to cancel selection.
Apply To: This button can be used to copy the recording settings to other cameras. Select which camera
you wish to copy to. "Select All" selects all cameras, "Unselect All" deselects all cameras. Click "OK" to
copy the settings or "Cancel" to exit without copying.
113
ERS-4 Instruction Manual
Advertisement
Table of Contents
