Table of Contents
Advertisement
6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter
button, then the first block of this bar will be selected (highlighted in blue frame). Use Right/Left arrow
key to switch to desired block as starting time, and press Enter button again to confirm. At this time, the
current and all following blocks will turn into gray, which means this gray time zone has been set to the
recording mode of gray(No Rec). User can also change the time zone to a different record mode (with
different color) by following instruction in next step.
7. Changing recording mode (color) of a time zone: Use Right/Left arrow key to switch to the first
block (with number on it) of a time zone. Clicking Enter button, and this time zone will switch to another
color, which means switching to another record mode. The color switch sequence is gray->orange-
>blue.
Press "Edit Time zone" button to edit the time zone.
132
ERS-4 Instruction Manual
Advertisement
Table of Contents
