Aux Mode Pages; System Settings - Garmin G500 Pilot's Manual

3.4

aux mode Pages

The Aux mode provides pages for System Setup, XM Information (if installed),
and system Status.
3.4.1

System Settings

G500 system settings are managed from the Aux Mode System Setup Page.
The following settings can be changed:
• Display Brightness (Mode and Level)
• Airspeeds (Glide, V
• PFD Options (Wind Vector)
• Dual Unit Synchronization (CDI and Baro)
• Date/Time (Date, Time, Time Format, and Time Offset)
• MFD Display Units (Distance/Speed and Altitude/Vertical Speed)
• System Display Units (Navigation Angle Reference, Pressure Units, and
Temperature Units)
The default values set by the installer during installation are restored by using
the Page Menu options. The "Restore Unit Defaults" selection restores all default
settings. Pressing the DFLT UNIT soft key will also restore the Default Unit
settings. The "Restore Airspeed Defaults" selection restores only the Airspeed
Reference default settings.
3-42
, V , and V )
R X Y
Figure 3-63 Aux Mode System Setup Page
Garmin G500 Pilot's Guide 190-01102-02 Rev. B