Garmin G500 Pilot's Manual page 280

Figure A-2 Database Information on the Splash Screen
4) Acknowledge the Power-up Page agreement by pressing the ENT key or the
right-most soft key.
5) Use the large MFD knob to select the AUX page group and then small MFD
knob to reach the System Status Page.
6) Press the DBASE soft key to place the cursor in the "DATABASE" window.
7) Turn the small MFD knob to scroll through the list and check that all databases
are current and there are no errors. If a database is highlighted in yellow, it is
either expired or the G500 can not determine the date.
8) Power down the GDU 620.
A-4
Garmin G500 Pilot's Guide 190-01102-02 Rev. B