Selecting A New Chart By Airport - Garmin G500 Pilot's Manual

3.5.3.2

Selecting a New Chart by Airport

A chart for a different airport may be chosen by selecting the identifier for
the desired airport.
Figure 3-93 Airport Identifier Selection
1) While viewing the Charts page of the FPL page group, press the SELECT soft
key to change the airport.
2) Use the large MFD knob to move the cursor to highlight a character.
3) Use the small MFD knob to change the character.
4) Press ENT to accept the selected airport.
5) Use the large and small MFD knobs to select the desired chart.
6) Press ENT to display the desired chart.
3-63
190-01102-02 Rev. B Garmin G500 Pilot's Guide