Garmin Terrain-Svt™ Page Aviation Data; Inhibiting/Enabling Garmin Terrain-Svt™ Alerting - Garmin G500 Pilot's Manual

4.4.1.2 Garmin Terrain-SVT™ Page Aviation Data
Select the display of Aviation data on the Garmin Terrain-SVT page. The Page
Menu selections allow you to hide or show aviation data overlay on the Terrain
or the Map Setup options for the Navigation Map pages.
1) While viewing the Terrain page of the MAP page group, press MENU for Map
selections to hide or show aviation data overlay on the Terrain or the Map
Setup options for the Navigation Map pages.
Figure 4-12 Show/Hide Aviation Data on the Terrain-SVT Page
2) Press ENT to save the highlighted value.
4.4.1.3 Inhibiting/Enabling Garmin Terrain-SVT™ Alerting
Terrain-SVT also has an inhibit mode that deactivates the PDA/FLTA aural
and visual alerts. Pilots should use discretion when inhibiting Terrain-SVT and
always remember to enable the system when appropriate.
Figure 4-13 Terrain-SVT Alerting Disabled (Alerts Inhibited) Annunciation (PFD & MFD)
1) In MAP page group, turn the small MFD knob to reach the Terrain SVT Page.
2) Press the INHIBIT soft key to inhibit or enable Terrain SVT (choice dependent
on current state).
OR
1) Press the MENU key.
2) Use the large or small MFD knob to highlight "Inhibit Terrain" or "Enable
Terrain" (choice dependent on current state) and press the ENT key.
4-12
Garmin G500 Pilot's Guide 190-01102-02 Rev. B