Traffic System Status - Garmin G500 Pilot's Manual

4.5.4

Traffic System Status

NOTE: Refer to the equipment documentation for information on the
self-test and operating modes.
The traffic mode is indicated in the upper left corner of the Traffic Map
Page.
Mode
TAS Self-test Initiated
TAS Operating
TAS Standby
TAS Failed*
If the unit fails, an annunciation as to the cause of the failure is shown in the
center of the Traffic Map Page.
Traffic Map Page
Annunciation
NO DATA
DATA FAILED
FAILED
190-01102-02 Rev. B
Traffic Mode Annunciation
(Traffic Map Page)
TEST
OPERATING
STANDBY
(also shown in white in center of page)
FAIL
Table 4-7 TAS Modes
Data is not being received from the TAS unit
Data is being received from the TAS unit, but the
unit is self-reporting a failure
Incorrect data format received from the TAS unit
Table 4-8 TAS Failure Annunciations
Garmin G500 Pilot's Guide
Traffic Display
Enabled Icon
(Other Maps)
Description
4-19