Vertically Scanning A Storm Cell - Garmin G500 Pilot's Manual

4.8.6.2

Vertically Scanning a Storm Cell

NOTE: Vertical scanning of a storm cell should be done with the aircraft
wings level to avoid constant adjustment of the Bearing Line.
1) While in the Horizontal Scan view, press the CONTROL and then the BRG soft
keys. This displays the Bearing Line.
OR
Press MENU and turn the large or small MFD knobs to highlight the "Show
Bearing Line" menu item and press the ENT key. This displays the Bearing
Line.
2) Press the MFD knob to activate the Bearing Line Adjustment in the Control
window. Turn the Large MFD knob to highlight the Bearing value.
3) Turn the small MFD knob to place the Bearing Line on the desired storm cell or
other area to be vertically scanned.
4-76
Figure 4-66 Vertical Scan Display
Garmin G500 Pilot's Guide 190-01102-02 Rev. B