Viewing Charts - Garmin G500 Pilot's Manual

5.1

viewing Charts

When the Chart function is available, charts will be shown on the third page
of the Flight Plan page group. The chart page will default to the nearest airport
if no flight plan or destination airport is present. While you are on the ground,
the displayed charts will default to the current airport location regardless of
flight plan.
NOTE: The chart for the destination airport or loaded approach will
automatically be selected.
Figure 5-1 ChartView Chart Page
1) Turn the large MFD knob to the Flight Plan (FPL) page group.
2) Turn the small MFD knob to the Charts page.
5-2
Figure 5-2 FliteChart Chart Page
Garmin G500 Pilot's Guide 190-01102-02 Rev. B