Connectinga Regular Tv To The Vcr - Mitsubishi HS-U110 Owner's Manual

Chapter 2: Connecting YourVCR Connecting theTelevisiion (cont.)
...then you will need a splitter that looks like this. If the TV's antenna terminal looks like this...
®
ANTENNA IN
OO
UHF
®
VHF
©O
UHF
©©
VHF
No splitter needed
Connect to
UHF/VHF splitter
_ _UHF_ IN onTV
]
Coonect to
From ANTENNA OUT on VCR VHF IN on "IV
UHF/VHF splitter,, _ Connect to
, _ _-'_UHFINonTV_ __
_" __X.,,_ _Connectto
From ANTENNA OUT on VCR _'_ VHF IN on TV
Connectinga regular TV to the VCR
To connect a regular TV to the VCR:
0 Take the black cable (called a coaxial cab]e) that is supplied
with your VCR and attach :it to the terminal labeled AN-
TENNA OUT on the back of your VCR.
O Connect the other end of this cable to the terminal on :Four TV
labeled ANTENNA IN. This terminal is sometimes also called
"ANT-IN" or WHF IN. _
If you have an older TV without this kind of terminal, you will
have to use a splitter and tlhen connect the splitter to the
television.
O
If you have a TV with audio and video inputs, you should
proceed to the ne_ section, "Connecting a TV with audio and
video inputs." Otherwise, :you are finished connecting your
TV_
VCR ANTENNA TERMINAL
ANTENNA_,,__ 0
I[ • 11
s S
ii 6 _1
OUT
i
ANTENNA OUT
ANTENNA IN-,
y?
"IV without an ANTENNA IN terminal (single antenna terminal for VHF and UHF)
UHF/VHF Splitter Connect to
_'-
Connect to
From ANTENNA OUT
VHF iN on
on VCR
TV.
TV ANTENNA TERMINAL
ei
ANTENNA IN
UHF/VHF Splitter Connect 'to
UHF IN on TV.
From ANTENNA Connect to
OUT on VCR VHF IN on "IV.
16