Connectinga Regular Tv To The Vcr - Mitsubishi HS-U410 Owner's Manual

Chapter2: ConnectingYourVCR Connectingthe Television (cont.)
If the TV's antenna terminal looks like this ...... then you will need a splitter that looks like this.
®
ANTENNA IN
©©
UHF
®
VHF
©©
UHF
©©
VHF
No splitter needed
UHF/VHF splitter Connect to
_.__/UHF IN on _€
_[ -::_
--Conoec,,o
From ANTENNA OUT'on VCR VHF IN on TV
UHF/VHF splitter x ,_. Connect to
_{_E__;_::._ UHF IN on TV
_-_'_ _ Connect to
From ANTENNA OUT on VCR _ VHF IN on "IV,
Connectinga regular TV to the VCR
(-1
To connect a regular TV to the V _JR:
q[]) Take the black cable (called _ coaxial cable) that is supplied
with your VCR and attach it to the terminal iLabeled AN-
TENNA OUT on the back of your VCR.
O Connect the other end of this cable to the ter:_inal on your TV
labeled ANTENNA IN. This l:erminal is sometimes also called
"ANT-IN" or 'WHF IN."
If you have an older TV without this kind of';erminal, you. will
have to use a splitter and then connect the splitter to the
television.
O
If you have a TV with audio and video inputs, you should
proceed to the next section, "Connecting a 'I_r with audio and
video inputs." Otherwise, you are finished connecting your
TV_
VCR ANTENNA TERMINAL
ANTENNA
II • }l
I( e'll
OUT
O _ ANTENNA OUT ANTENNAIN--
1V without an ANTENNA IN terminal (single antenna terminal for VHF and UHF)
UHF/VHF Splitter Connect to
Connect to
From ANTENNA OUT
VHF IN on
on VCR
TV.
TV ANTI'NNA TERMINAL
0 !
ANTENNA IN
IJHF/VHF Splitter Connect to
I UHF IN on TV.
From ANTENNA
OUT on VCR VHF IN on TV.
16