The Tracking - Mitsubishi HS-U110 Owner's Manual

Chapter 4: UsingtheAdvanced Features UsingtheAdvanced Playback Controls(cont.)
Speed search >
oo,o .ow
,ayback __2"
115 slow-motion playback \ >
1/10 slow-motion playback J_
Press the REW button
1/30 slow-motion playback
._
I Still I
/ reverse slow-motion playback J
// Press the FF button
// < 1/5 reverse slow-motion playback /-
( everse,ast ,ayback I
Reverse speed search J -,-/
_Important:
_" I t11-/ I-/1"-/ " : -s_'.
/. -/L/= LI LIs _---_ .........
DTR light
_Important:
After about five minutes in the still or slow-motion mode, the
VCR will automatically stop to avoid damage to the tape.
Depending on the type of TV used, the picture may vibrate
vertically.
usingtheJOG/ADJUST buttonsto controlthe playback: speed
The JOG/ADJUST buttons allow you to advance the tape frame-
by-frame.
0 While the VCR is playing a tape, press the PAUSE button to
freeze the picture on the screen.
O Press the JOG/ADJUST %" button to advance forward one
frame and the "-" button to back up one flrame.
To resume normal playback, press the PLAY button.
usingstilladjustment
Sometimes during still frame, the picture may _[brate or shake.
To correct this problem, press the CHANNEL, buttons on the front
panel until the vibratiLon is reduced or stops. Side-to-side vibra-
tion cannot be corrected.)
Adjustingthe tracking
automatic tracking
Your VCR automatically adjusts the tape to g_ve you the best
quality picture. When you press the PLAY button, the DIGITAL
TRACKING (DTR) light wil! flash, showing that the VCR is
adjusting the picture. When the VCR has finished adjusting the
picture, the DTR light: will shine steadily.
A certain amount of"noise" in the picture is normal while the
VCR is tracking a tape.
44