Table of Contents
Advertisement
Chapter 3 : Operating YourVCR
SettingUpYourVC_ for theRrst'time(conL)
Setting up your VCR if you are usinga monitor"IV
O
Turn on your TV and switch it to the correct
external
input.
(For most Mitsubishi
TVs, this means
pressing
the TV's
INPUT
button until you see the words "E:_t-l" on the screen.)
Look at the back panel
of the VCR and se Lthe VIDEO CHAN-
NEL switch to OFF/AV.
Helpful Information
@} Turn the VCR on by pressing
the POWEE
button.
Whatisa Monitor 71/?
A monitor TVis one that has both audio and video inputs. This
enables the TV screen to display a picture fro._an external tuner,
such as a VCR
tuner.
If your TV does not have both audio and video inputs,
it is a
_regular" TV.
Once you know what type of TV you are usfn$, you might
want to
mark it here so that you (and others)
won't fo_'get.
Monitor
D
"Regular"[--]
$ Usingthe RemoteControl
In this section, you]l learn how to set up and use your remote
control. This section includes:
• Using the remote control to operate
the VCR, and
• Using the remote control to operate
the TV.
Using the remotecontrolto operatethe VCR
installing thebatteries
Unpack
two AA size batteries.
To remove the back cover, press the ridged
area gently, then
push the cover in the direction
of the arrow and lift.
Load the batteries,
making
sure the polarities
(+) and (--) are
correct.
For best results,
please
use Duracell
AA MN-1500
batteries.
2O
Advertisement
Table of Contents
