The Present Time; Techniques; By Time - Mitsubishi HS-U110 Owner's Manual

Chapter4: UsingtheAdvanced Features
Displayingthe presenttime
The present time display on the fluorescent display shows the
current time when the VCR is turned off or when a tape is not
loaded into the VCR. If you have not set the clock (or if there has
been a power failure of more than 30 seconds.), the display will
show
--
:-
To see the current time when the VCR is on:
O Press the DISPLAY button on the front panel or on the
remote control. The present time display' appears on _he TV
screen.
VCR
Stop
Sun 7:30P
0h20m,08s
- Present Time
O To turn off the present time display, press the DISPLAY
button once. During playback, the present time display
automatically turns off after 4 seconds.
Searching Techniques
The VCR lets you search through a tape in a number of ways.
These include:
• Edit searching,
• Speed searching,
• Searching by time,
• Searching for a blank portion of tape, and
• Index search techniques.
Edit searching
Edit search is very useful for editing out commercials if you are
recording a program while you are watching it. It is also usefal as
a general editing feature. This feature is sometimes called EE
(electronic-to-electronic) editing.
This function works only when you are in "record-pause" mode.
To use edit search:
O During record pause, press the FF or REW button on the
remote control or on the front panel to locate the point where
you want to resume recording.
46