Table of Contents
Advertisement
Connectingan older TV to the VCR
O
Take the black cable (called a coaxial cable) that is supplied
with your VCR and attach
it to the terminal
labeled
AN-
TENNA
OUT on the back of your VCR.
O
Connect
the other end of this cable to the terminal
on your TV
labeled ANTENNA
IN. This terminal
is sometimes
also called
"ANT-IN"
or 'WHF IN." If you have an older TV without
this
kind of terminal,
you will have to use a splitter
and then
connect the splitter
to the television.
O
If you have a TV with audio and video in'puts, you should
proceed
to the next section, "Connecting
a TV with audio and
video inputs."
Otherwise,
your connections
are complete.
ANTENNA
TERMINALS
(VCR)
ANTENNA
TERMINAL
(TV)
,,'"O1_[_
ANTENNA
OUT
ANTENNA
IN
_
.......
Q
• •
ANTENNA
IN
TV withoutANTENNA IN terminal (single antenna terminal for VHF and UHF)
UHF/VHF splitter
Connect to UHF IN
on TV
From ANTENNA OUT
Connect to VHF IN
on VCR
on TV
UHF/VHFsplitter
Connectto UHF IN
From ANTENNAOUT
Connectto VHF IN
on VCR
on TV
C>Important:
Connecting
your TV in the way shown above will not allow you to
enjoy the stereo sound of your VCR, even if your TV is equipped
with stereo.
Connectinga TV with audio and video inputs
Your new VCR can be connected
to many different
types of
televisions.
Because
you purchased
a Hi-Fi VCR, you will want to
take advantage
of its superior
sound
capability
and connect it to a
stereo TV system
with audio and video inputs.
Before you begin this section:
• You should have already
completed
the section
"Connecting
an older TV to the VCR."
connecting a stereoTVwithaudioand videoinputs
Connect
a set of red and white audio cables to the AUDIO
OUTPUT
terminals
on the VCR labeled
AUDIO OUT. The
red cable is for connecting
the right (R) channel
and the white
cable is for connecting
the left (L) channel.
15
Advertisement
Table of Contents
