Adjustingthe Tracking - Mitsubishi HS-U260 Owner's Manual

Speed search >
j _f"
Ouick _ew . _> _"
Playback __
1/5 slow-motion playback
1110 slow-motion playback >
Press the REW button
113o slow-motion playback > /.j
Still J J
1/30 reverse slow-motion playback I
_ Pre_s the FF button
. J , 1/10 reverse slow-motion playback I
J < 1/5 reverse slow-motion playback I J
J < Reverse playback I _
< Reverse fast playback I
Reverse speed search J
_>Important: After about five minutes in the still or slow-motion mode, the
VCR will automatically stop to avoid damage to the tape.
Depending on your TV, the picture may vibrate vertic_ly.
usingthe JOG/ADJUST buttons to control t he play[_,ack speed
The JOG/ADJUST buttons, allow you to advance the tape frame-
by-frame.
O While the VCR is playing a tape, press the PAUSE button to
freeze the picture on the screen.
O Press the JOG/ADJUST %" button to advance forward one
frame and the "-" button to back up o_e frame.
O To resume normal playback, press the PLAY button.
usingstilladjustment
Sometimes during still frame, the picture ]nay vibrate or shake.
To correct this problem, press the CHA_rNEL buttons on the front
panel until the vibration is reduced or stol_ s. (Side-to-side vibra-
tion cannot be corrected.)
Adjustingthe tracking
I LI I-7 I"/I-7 (" -"" ..s_'-,.
I. ILI. U LI, _'i_ .......
]
DTR light
4
automatic tracking
Your VCR automatically adjusts the tape to give you the best
quality picture. When you press the PLA_ button, the DIGITAL
TRACKING (DTR) light will flash, sho_mg that the VCR is
adjusting the pict-are. When the VCR has finished adjusting the
picture, the DTR light will shine steadily'.
DImportant: A certain amount of"noise" in the picture is normal while the
VCR is tracking a tape.
47