Pfaff creative 1472 Instruction Book page 96

Winding through the needle
Only with metal sewing foot! Swing
bobbin winder thread guide 44 to the
front.
Raise sewing foot. Switch on the dual
feed. Set needle at top position. Place
bobbin on bobbin winder 25. Disen
gage sewing action. Pull the needle
thread under the sewing foot to the
right and through guide 44 (into open
ing A and around finger B, see illustra
tion). Wind the thread a few times
clockwise around the bobbin and
press it to the right. Then turn on the
main switch, press the foot control and
wind the bobbin. Push the full bobbin
to the left, remove it and cut the
thread using thread cutter 37.
Important: If an empty M-memory is
selected, it is not possible to wind the
bobbin. A program between 00 and 99
must be selected.
4
Engaging the sewing action: hold the
hand wheel firmly and turn disc 4 to
the rear. Then turn the hand wheel to
the front until it engages.
15