Pfaff creative 1472 Instruction Book page 134

..
prog
-_-
(ci
00
KK5_6
0Aj
Needle:
100 or 130 H-N
Needle thread: buttonhole thread
Stitch length:
longest stitch
Top-stitch seams produce
nice ornamental
effects. For this, selection of a suitable thread is
important. To obtain
particularly prominent
seams, we recommend using buttonhole thread.
prog
.--
j
00
OA
Buttonhole thread can also be wound on the bob
bin and used as bobbin thread. In this case,
sewing thread should be used in the needle. For
this sewing job the needle thread tension must be
set relatively high. For topstitching, the fabric is
placed in the machine wrong side up. Select the
longest stitch. For topstitching, a No. 80 needle
may be used.
• For difficult top-stitch seams we recommend
using the straight-stitch foot and the round-
hole needle plate (special accessory).
• Before you fit these, set the needle at Its
middle position.
It is not possible to select a program now. To
select another program press the key "twin
needle" again.
prog
--
I
00
3-5
2
Stitch length:
6.0 mm
Needle:
80
Thread:
sewing thread
If you cannot find a suitable buttonhole thread for
specific sewing work,
try using two needle
threads together. Place one thread to the right,
and the other to the left of disc "C", (see page 96)
and Insert both threads In the needle eye.
prog
(I
05 OA
Stitch length: 6.0 mm
Needle:
80
Thread:
sewing thread
• This stitch can be used without any difficulty
for sewing a top-stitch seam along lapel and
pocket edges or sewing an ornamental seam.
For this, normal sewing thread is used.
prog
--
(ci
00
Needle:
twin needle;
needle gauge, as desired
The twin needle can be used not only for embroi
dery work, but also for top-stitching. It produces a
particularly attractive effect along hem edges and
on facings.
Fold the bottom edge, the facing or border edge
over to the wrong side and baste it down. Sew on
the right side of the fabric with the twin needle.
Trim away the excess material on the wrong side.
(For threading instructions see page 96).
-H
Buttonhole thread as needle thread
OA