Pfaff creative 1472 Instruction Book page 159

Darning with wool
prog
--
c
1013a
—
2—3
6
Feed dog: lowered
Presser bar lifter: in darning position
(see page 74)
Sewing thread:
Embroidery and darning thread
Draw the wool thread through the needle hole of
the darning foot and into the thread guide (Fig. 1).
Place the wool thread under the darning foot.
Start at the top left and place the wool thread
back and forth across the damaged area (Fig. 2).
Then cut the wool thread and sew overthe rows of
wool thread with zigzag stitches or an elastic-
stitch seam (Fig. 3).
Do not place the lines of stitching too close toge
ther as this would make the darn too hard.
All darning work described above is carried out on
the reverse side of the fabric, so that the darn
looks neater on the face side.
1
2
3
75