Checking The Needle Thread Tension - Pfaff creative 1472 Instruction Book

:
-
..
... -
N
Switch on main switch 9, have material
cover needle hole (see illustration B)
and lower the sewing foot onto it by
pressing presser bar lifter 17 down
wards. Position A of lever 17 is for
darning.
J
4
Needle thread tension 39
A
=
setting mark
Important!
In order to obtain good sewing results
it is important to check the following:
1. that the needle is in good order,
2. and the needle- or bobbin thread
tension is correct.
The bobbin thread tension is adjusted
correctly at the works.
If on checking the bobbin thread ten
sion (see page 16) you find it is neces
sary to correct it, turn the adjusting
screw by small amounts only.
Checking the needle thread tension:
The normal setting is from 3 to 5. The
higher the number, the tighter the
thread tension. This is checked with a
wide zigzag stitch (program 10). Sew a
short seam. The thread interlace
should lie exactly between the two
material plies.
Range 3 is for buttonhole sewing
Press the pedal. The harder you press,
the faster the Creative sews.
24
\
J
25