Pfaff creative 1472 Instruction Book page 109

Top and bottom needle position:
When the machine stops, the needle
goes up. Press key 15 for the needle
down position. Display A then lights up
and the needle will remain down when
sewing is stopped. Press key 15 again.
The indicator light goes out and the
needle rises and stays at the top posi
tion.
Tie-off/buttonhole. To sew: Press key
19: Indicator C lights up, the pro
grammed seam is tied
off
at the begin
ning, then indicator light C goes out. If
you push the key during sewing, the
light goes on and a seam is tied
off
immediately, whereas a pattern is tied
off
at the end. The display then goes
out. Buttonhole: In buttonhole pro
grams 90 and 91, key 19 is used for
determining and memorizing the length.
For more details please see pages
78-91.
Reverse sewing: Press key 18 before
you start sewing. Indicator light D
lights up and the machine sews back
wards permanently. If you press the
key during sewing, the light will not go
on and the machine will sew back
wards as long as the key is pressed.
Darning: The lengths of darning pro
gram 94 are also determined and
memorized with key 18.
N
Electronic bobbin thread monitoring:
Bobbin thread monitor 14 flashes
before bobbin thread runs out, It goes
out again when the full bobbin is
inserted and sewing is continued.
Important: cover 33 must always be
closed.
N
Electronic actual speed selection:
Press key 16 for slow sewing. Display
B lights up. The machine sews at half
speed. Press key 16 again. The display
goes out and the machine sews again
at full speed.
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
F
F