Pfaff creative 1472 Instruction Book page 167

[Lk1
Ic,lSl IJ2I1 I
iQJ
Determining the second bartack
(semi-automatic)
If you wish to determine the second bartack in a
programmed buttonhole, press 'tie-off/button
hole" key 19 (Fig. 2). A dash flashes in display 21
(Fig. 3) at the right of program 90. The machine
now sews slowly just before the end of the second
seam. When both seams are the same length,
press key 19 again. The second bartack is now
sewn and tied off.
This sewing sequence can also be applied for fully
automatic buttonholes when the two buttonhole
seams are not the same length anymore.
If you wish to sew the next buttonhole fully auto
matically, press key 19 again. (Same sewing se
quence as described on page 80). The flashing
dash will then have disappeared.
Note:
If you interrupt sewing at the reduced sewing
speed by releasing the foot control, the machine
will return to the normal speed when you
start
sewing again.
After sewing, cut the
buttonholes open
(see page 94).
prog
@
-r
'-o
3
5
Ri