Lap-Felling - Pfaff creative 1472 Instruction Book

4€
imitation lap seam sewn with
the ordinary sewing foot.
prog
--
t i
00
3—S OA
1
Place the two pieces of fabric one on top of the
other with their face sides, and sew them together
about one centimetre from the edge Neaten the
raw edge. Fold the seam allowance over to one
side and press Then topstitch on the face side of
the tabric, using the edge of the sewing foot as a
guide (Fig 1)
Double lap seam sewn with the felling foot (ape
cial accessory)
proq
J
-
1
00
3—S
Fihnq rnt
If two lines of stitching are to appear on the face
side of the lap-seamed fabric, the two pieces of
fabric must he placed together with their reverse
sides facing (Fig 4a)
If
on 1 y one lion of stitching is
to appear on the face side of the lap-seamed
fabric the two pieces of fabric must he placed
together with their face sides facing (Fig 4b).
First workstep
Place the two pieces of fabric one on top of the
other with the bottom ply protruding by the width
of the cutout in the tnllin foot Make sure the pro-
-
hurling edge enters the tellioq foot so that it is
folded and stitched down (Fig 2)
Second workstep
Open the two pieces and insert the seam ridge in
the telling foot. The ridge ic folded down in the foot
—
and stitched down along the edge Pull both fabric
plies apart lightly during sewing (Fig. 31
• Two telling feet are available as special acces
sories for stitching margins of 4 5 nod 6.5mm
3