Zoom B3 Operation Manual page 48

Effect Types and Parameters
102 Comp+Dist
103 Oct+Dist
104 Awah+Dist
105 Comp+AWah This effect combines compressor and auto-wah.
106 PH+Dist
PedalVox This simulates a vintage Vox wah pedal.
107
108 PedalWah This is a pedal wah effect for bass guitar.
109 PDL Reso Pedal wah with a strong character.
48
This effect combines a compressor and distortion.
Knob1
THRSH 0–50
Page01
Sets the level that activates the compressor. Adjusts the gain.
Dry 0–100
Page02
Adjusts level of original sound.
ATTCK 1–10
Page03
Adjusts the compressor attack rate.
This effect combines an octaver and distortion.
Knob1
Oct 0–100
Page01
Adjusts the volume of the effect sound
one octave down.
Dry 0–100
Page02
Adjusts level of original sound.
This effect combines auto-wah with distortion.
Knob1
Sense -10–-1, 1–10
Page01
Adjusts the sensitivity of the effect.
Dry 0–100
Page02
Adjusts level of original sound.
Chain Befr/Aftr
Page03
Sets the distortion insertion point.
Knob1
THRSH 0–50
Page01
Sets the level that activates the compressor. Adjusts the sensitivity of the effect.
Dry 0–100
Page02
Adjusts level of original sound.
ATTCK 1–10
Page03
Adjusts the compressor attack rate.
This effect combines a phaser and distortion in the style of the Roland JET PHASER.
Knob1
Gain 0–100
Page01
Adjusts the gain.
Rate 0–50
Page02
Adjusts the modulation rate.
Knob1
Freq 1–50
Page01
Adjusts the emphasized frequency.
Knob1
Freq 1–50
Page01
Adjusts the frequency that is emphasized.
Knob1
Freq 1–50
Page01
Adjusts the emphasized frequency.
DryMX 0–100
Page02
Adjusts the amount of original sound
in the mix.
Knob2
Gain 0–100
Tone 0–100
Adjusts the tone.
Knob2
P Gain 0–100
Adjusts the gain.
Tone 0–100
Adjusts the tone.
Knob2
Gain 0–100
Adjusts the gain.
Tone 0–100
Adjusts the tone.
Knob2
Sense -10–-1, 1–10
Reso 0–10
Adjusts the intensity of the resonance sound. Adjusts the compression ratio.
Knob2
Mode 1–4
Selects the jet sound mode.
P Tone 0–10
Adjusts the tone.
Knob2
P DryMX 0–100
Adjusts the mix with the unaffected sound. Adjusts the output level.
Knob2
P DryMX 0–100
Adjusts the mix with the unaffected
sound.
Knob2
P Reso 0–10
Adjusts the intensity of the effect
character.
Knob3
P Level 0–150
Adjusts the output level.
Ratio 1–10
Adjusts the compression ratio.
Knob3
Level 0–150
Adjusts the output level.
Chain Befr/Aftr
Sets the distortion insertion point.
Knob3
P Level 0–150
Adjusts the output level.
Reso 0–10
Adjusts the intensity of the resonance sound.
Knob3
P Level 0–150
Adjusts the output level.
Ratio 1–10
Knob3
Reso 0–10
Adjusts the intensity of the effect character.
Level 0–150
Adjusts the output level.
Knob3
Level 0–150
Knob3
Level 0–150
Adjusts the output level.
Knob3
Level 0–150
Adjusts the output level.