Setting Specific Patch Parameters
1
To activate the TOTAL menu
• Press .
PATCH
2
To adjust the patch level
• Turn of the left effect.
3
To adjust the balance between original and effected sounds
• Turn of the left effect.
14
CHAIN/NAME
CTRL PDL/CTRL SW
NOTE
• The setting range is 0-120.
HINT
• To change the overall volume of all patches, adjust the master level
(see page 18).
NOTE
• The setting range is 0-100. Set to 0 for only the original sound or 100
for only the effect sound.
NOTE
• Settings made for total
p a r a m e t e r s a r e s ave d
separately for each patch.