Zoom B3 Operation Manual page 40

Effect Types and Parameters
047 G-Krueger Simulation of the famous metal bass amp Gallien-Krueger 800RB from the eighties.
048 Heaven
049 Mark B
050 Tremolo
051 Slicer
052 4-Phaser
40
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
Off, Low, Mid,
Color
Hi
Page03
Adjusts the preset tone.
This simulation of the Eden WT-800 can be used with a wide variety of playing styles.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
ENHNC 0–10
Page03
This tone control changes the frequency
and level according to the knob position.
This simulates the Italian Markbass Little Mark III.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
Color 0–6
Page03
Adjusts low and high frequencies.
This effect varies the volume at a regular rate.
Knob1
Depth 0–100
Page01
Adjust the depth of the modulation.
UP 0–UP 9,
Wave DWN 0–DWN 9,
Page02
TRI 0–TRI 9
Sets the modulation waveform.
This effect creates a rhythmical sound by continuously slicing the input.
Knob1
PTTRN 1–20
Page01
Sets effect pattern.
THRSH 0–50
Page02
Adjusts effect threshold.
This is a 4-stage phaser effect that produces a swooshing sound.
Knob1
Rate 0–50
Page01
Adjusts the modulation rate.
LoCut Off–800Hz
Page02
Sets the cut frequency in the low
range of the effect sound.
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100
Adjusts the gain.
CAB See Table 1
Selects the cabinet.
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100
Adjusts the gain.
CAB See Table 1
Selects the cabinet.
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100
Adjusts the gain.
CAB See Table 1
Selects the cabinet.
Knob2
Rate 0–50
Adjusts the rate of the modulation.
Knob2
Speed 1–50
Sets modulation speed.
Level 0–150
Adjusts the output level.
Knob2
P Reso -10–10
Adjusts the intensity of the effect character. Adjusts the output level.
Knob3
Trebl -10–10
Adjusts the high frequency level.
P Level 0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
Trebl -10–10
Adjusts the high frequency level.
P Level 0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
Trebl -10–10
Adjusts the high frequency level.
P Level 0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
P Level 0–150
Adjusts the output level.
Knob3
Bal 0–100
Adjusts the balance between original
and effect sounds.
Knob3
Level 0–150
P