Zoom B3 Operation Manual page 41

This is an 8-stage phaser effect that produces a swooshing sound. Compared to the
053 8-Phaser
4-stage phaser, the effect sound is more detailed.
Rate
Page01
Adjusts the modulation rate.
LoCut
Page02
Sets the cut frequency in the low
range of the effect sound.
054 The Vibe This vibe sound features unique undulations.
Speed
Page01
Sets modulation speed.
Wave
Page02
Adjusts modulation waveform.
055 DuoPhase This effect combines two phasers.
RateA
Page01
Adjusts speed of LFO A modulation. Adjusts speed of LFO B modulation. Adjusts the output level.
ResoA
Page02
Adjusts resonance of LFO A modulation. Adjusts resonance of LFO B modulation. Sets how two phasers are connected.
DPT_A
Page03
Adjusts depth of LFO A modulation.
056 WarpPhase This phaser has a one way effect.
Speed
Page01
Sets modulation speed.
DRCTN
Page02
Sets direction of warping.
057 Chorus This effect mixes a shifted pitch with the original sound to add movement and thickness.
Depth
Page01
Sets the depth of the modulation.
LoCut
Page02
Specifies the low-range cutoff point
for the effect sound.
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
058 Detune
type has a chorus effect without much sense of modulation.
Cent
Page01
Adjusts the detuning in cents, which
are fine increments of 1/100-semitone.
Tone
Page02
Adjusts the tone.
059 VintageCE This is a simulation of the BOSS CE-1.
Comp
Page01
Sets the sensitivity of the compressor. Sets the speed of the modulation.
Level
Page02
Adjusts the output level.
Knob1
0–50 P Reso
Adjusts the intensity of the effect character. Adjusts the output level.
Off–800Hz
Knob1
0–50 P Depth
Sets the depth of the modulation.
0–100 Mode
Sets effect to vibrato or chorus.
Knob1
1–50 P RateB
0–10 ResoB
1–100 DPT_B
Adjusts depth of LFO B modulation.
Knob1
1–50 P Reso
Sets effect resonance.
Go, Back
Knob1
0–100 Rate
Sets the speed of the modulation.
Off–800Hz Level
Adjusts the output level.
Knob1
-50–50 PreD
Sets the pre-delay time of the effect
sound.
0–10 Level
Adjusts the output level.
Knob1
0–9 Rate
0–150
Knob2
-10–10 Level
Knob2
0–100 Bias
Adjusts bias of waveform modulation.
VIBRT, CHORS Level
Adjusts the output level.
Knob2
1–50,
Level
SyncA, RvrsA
0–10 Link
1–100
Knob2
0–10 Level
Adjusts the output level.
Knob2
1–50 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 PreD
Turns pre-delay on or off.
Knob2
0–50 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 LoCut
Sets the cut frequency in the low
range of the effect sound.
Knob2
1–50 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
Knob3
0–150
Knob3
0–100
0–150
Knob3
0–150
Seri, Para, STR
Knob3
0–150
Knob3
0–100 P
On/Off
Knob3
0–100 P
Off–800Hz
Knob3
0–100 P
NEXT
41