Zoom B3 Operation Manual page 29

9
To return to the Home Screens
• Press .
To change the Looper settings
• Press of the right unit.
• To activate the Undo function
Turn of the right unit.
HINT
• When Undo is ON, you can cancel the last overdubbing by pressing for 1 second.
After undoing, you can also redo by pressing
• To select the STOP MODE
Turn of the right unit.
HINT
• Even when set to "FINISH" or "FADE OUT" , you can stop loop playback immediately by pressing and
holding down
• To adjust the RHYTHM LEVEL
Turn of the right unit.
HINT
• You can return to the Home Screens while the loop is playing.
NOTE
• Returning to the Home Screens will not erase the loop.
• Turning the power OFF will erase the loop.
NOTE
• When Undo is ON, the maximum loop recording time is
limited to 20 seconds.
STOP MODE
STOP
FINISH
FADE OUT
.
for 1 second again, restoring the last overdubbing.
How loop playback stops
Playback stops immediately
Playback stops after the loop plays to its end
Playback stops after fading out
LOOPER
29