Setting Specific Patch Parameters
6
To set an expression pedal function
Set the control destination.
• Turn of the right effect.
Set the adjustment range.
• Turn of the right effect to set the minimum value.
• Turn of the right effect to set the maximum value.
16
NOTE
• INPUT VOL:
Use this to control the input level.
• OUTPUT VOL: Use this to control the output level.
• NO ASSIGN:
No function is assigned.
• BAL:
The balance between the original sound and the
effect sound can be adjusted.
HINT
• Turn to show the different parameters that can be controlled by
the expression pedal.
• See "Effect types and parameters" for details about the parameters
that can be controlled for each effect.
• Rhythm and looper output levels are not affected when controlling
the Output Volume with an expression pedal.
HINT
• The minimum value can be set higher than the maximum value.
When set this way, pushing the pedal down decreases the effect,
while letting it up increases the effect.