Zoom B3 Operation Manual page 27

4
To record a phrase and play it back
• Press .
If set to "Manual"
• When is pressed again or the maximum recording time (about 40 seconds) is
reached, loop playback starts (and "PLAY" appears on the display).
If set to a note mark
• Recording continues for the set time and then loop playback starts (and
"PLAY" appears on the display).
HINT
• During recording, press
to cancel recording.
5
To adjust the loop volume
• Turn of the right unit.
Recording
NOTE
• When using a rhythm, recording will start after the precount.
• When using a rhythm, the loop timing will be quantized, so
even if you stop the loop recording a little out of time, the
loop end point will be adjusted to match the tempo correctly.
NOTE
• The setting range is 0-100.
LOOPER
Playing
NEXT
27