Zoom B3 Operation Manual page 20

Changing Various Settings
6
To select the battery type
• Turn of the middle effect to set the battery type to ALKALINE or Ni-MH
(nickel-metal hydride).
7
To adjust the USB audio monitoring balance
• Turn of the right effect.
8
To adjust the recording level
• Turn of the right effect.
20
: Operating on batteries
: Operating on adapter power
: Operating on USB bus power
NOTE
• Set the battery type correctly in order to allow the remaining battery
charge to be shown accurately.
NOTE
• This adjusts the balance between the signals sent from a connected
computer (DAW) and the signal input and processed through the
unit (DIRECT).
• The setting range is 0-100.
• Set to 0 to monitor only the DIRECT signal or 100 to monitor only the
DAW signal.
NOTE
• This adjusts the level of the signal sent to the computer.
• The setting range is ±6 dB.