Zoom B3 Operation Manual page 46

Effect Types and Parameters
088 DynaDelay
089 FilterDly
090 PitchDly
091 StereoDly
PhaseDly This effect applies a phaser to a delayed sound.
092
093 TrgHldDly This delay samples and holds using picking as the trigger.
094 HD Reverb This is a high-definition reverb.
46
This dynamic delay adjusts the volume of the effect sound
according to the input signal level.
Knob1
Time 1–2000
Page01
Sets the delay time.
F .B 0–100
Page02
Adjusts the feedback amount.
This effect filters a delayed sound.
Knob1
Time 1–2000
Page01
Sets the delay time.
Rate 1–50
Page02
Sets the speed of the modulation.
Level 0–150
Page03
Adjusts the output level.
This effect applies pitch shift to a delayed sound.
Knob1
Time 1–2000
Page01
Sets the delay time.
F .B 0–100
Page02
Adjusts the feedback amount.
This stereo delay allows the left and right delay times to be
set separately.
Knob1
TimeL 1–2000
Page01
Adjusts delay time of left channel
delay.
LchFB 0–100
Page02
Adjusts delay feedback of left channel. Adjusts delay feedback of right channel. Adjusts the output level.
LchLv 0–100
Page03
Adjusts delay output of left channel.
Knob1
Time 1–2000
Page01
Sets the delay time.
Rate 1–50
Page02
Sets the speed of the modulation.
Knob1
Time 10–1000
Page01
Sets the delay time.
THRSH 0–30
Page02
Adjusts effect threshold.
Knob1
Decay 0–100
Page01
Sets the duration of the reverberations. Adjusts the tone.
PreD 1–200
Page02
Adjusts the delay between input of the
original sound and start of the reverb sound.
Knob2
Sense -10–-1, 1–10
Adjusts the effect sensitivity.
Level 0–150
Adjusts the output level.
Knob2
F .B 0–100
Adjusts the feedback amount.
P Depth 0–100
Sets the depth of the modulation.
Knob2
Pitch -12–12
Sets volume of pitch shift applied to
delayed sound.
Tone 0–10
Adjusts the tone.
Knob2
TimeR 1–2000
Adjusts delay time of right channel
delay.
RchFB 0–100
RchLv 0–100
Adjusts delay output of right channel.
Knob2
F .B 0–100
Adjusts the feedback amount.
4 STG, 8 STG,
P Color
inv 4, inv 8
Sets the tone of the effect type.
Knob2
Duty 25–100
Sets the time that the sample-and-
hold sound is produced.
Level 0–150
Adjusts the output level.
Knob2
Tone 0–10
HPF 0–10
Adjusts high-pass filter cutoff frequency. Adjusts the output level.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Reso 0–10
Adjusts the intensity of the modulation
resonance.
FS InputMute
Knob3
P Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
Adjusts the output level.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
InputMute
FS
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
Adjusts the output level.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
P
P
P
P