Zoom B3 Operation Manual page 13

3
To set where to store or swap the new patch
To change the patch number where stored/swapped
• Turn of the right effect.
To change the bank where stored/swapped
• Turn of the right effect.
4
To complete patch storing/swapping
• Press .
• After "COMPLETE!" appears on the display, the stored/swapped patch opens.
Change the patch number
Change the bank
STORE/SWAP
NOTE
• The currently active patch
cannot be selected as the
destination.
• The current setting values
are automatically saved.
HINT
• To cancel this, press any
key instead of .
13