Zoom B3 Operation Manual page 35

This effect uses the comb filter that results from fixing the modulation of the flanger like
014 CombFLTR
an equalizer.
Freq
Page01
This sets the emphasized frequency.
HiDMP
Page02
Adjusts the treble attenuation of the
effect sound.
015 AutoWah This effect varies wah in accordance with picking intensity.
Sense
Page01
Adjusts the sensitivity of the effect.
Level
Page02
Adjusts the output level.
016 Z Tron This is like a Q-Tron Envelope Filter in LP mode.
Sense
Page01
Adjusts the sensitivity of the effect.
Level
Page02
Adjusts the output level.
017 M-Filter This envelope filter with MOOG MF-101 low pass filter favor can be set in a wide range.
Freq
Page01
Sets minimum frequency of envelope
filter.
Type
Page02
Sets filter type.
Bal
Page03
Adjusts the balance between original
and effect sounds.
018 A-Filter This is a resonance filter with a sharp envelope.
Sense
Page01
Adjusts the effect sensitivity.
Dry
Page02
Adjusts level of original sound.
019 Cry This effect varies the sound like a talking modulator.
Range
Page01
Adjusts the frequency range processed
by the effect.
Bal
Page02
Adjusts the balance between original
and effect sounds.
020 Step This special effect gives the sound a stepped quality.
Depth
Page01
Sets the depth of the modulation.
Shape
Page02
Adjusts the effect envelope.
Knob1
1–50 P Reso
Adjusts the intensity of the resonance
sound of the effect.
0–10 Level
Adjusts the output level.
Knob1
-10–-1, 1–10 P Reso
Adjusts the intensity of the resonance
sound.
0–150
Knob1
-10–-1, 1–10 P Reso
Adjusts the intensity of the resonance
sound.
0–150
Knob1
0–100 P Sense
Sets effect sensitivity.
HPF, BPF, LPF Chara
Adjusts amount of filter applied.
0–100 Level
Adjusts the output level.
Knob1
1–10 P Peak
Adjusts the Q value of the filter.
0–100 Level
Adjusts the output level.
Knob1
1–10 Reso
Adjusts the intensity of the modulation
resonance sound.
0–100 Level
Adjusts the output level.
Knob1
0–100 Rate
Sets the speed of the modulation.
0–10 Level
Adjusts the output level.
Knob2
-10–0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150
Knob2
0–10 Dry
Adjusts level of original sound.
Knob2
0–10 Dry
Adjusts level of original sound.
Knob2
0–10 Reso
Sets effect resonance.
2Pole, 4Pole VLCTY
Sets speed of filter action.
0–150
Knob2
0–10 Mode
Selects whether the direction of
filter change is up or down.
0–150
Knob2
0–10 Sense
Adjusts the sensitivity of the effect.
0–150
Knob2
0–50 P Reso
Adjusts the intensity of the modulation
resonance sound.
0–150
Knob3
0–100
Knob3
0–100
Knob3
0–100
Knob3
0–10
Fast, Slow
Knob3
Up/Down
Knob3
-10–-1, 1–10 P
Knob3
0–10
NEXT
35