Normal Copying; Making Copies With The Automatic Document Feeder - Olivetti d-Copia 3501 Operation Manual

NORMAL COPYING

This section describes the normal copying procedure.

Making copies with the automatic document feeder

1-sided copies of 1-sided originals
Original
1 Place the originals in the document feeder
tray. (pages 4-3 to 4-6)
Make sure that the 1-sided to 1-sided copy
2
mode is selected.
A4
ORIGINAL
A4
A4
A4
B4
A4R
already selected, steps 3 to 5 are not needed.
3 Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
Touch the [1-sided to 1-sided copy] key.
4
Copy
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in
the dashed area on the
display. If the 1-sided to
1-sided copy mode is
Touch the [1-sided to 1-
sided copy] key.
5 Touch the [OK] key.
0
OK
6 Make sure that paper of the same size as
the originals is automatically selected*.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
O
Even if the message above appears, copying can
be performed onto the currently selected paper.
*
The following requirements must be satisfied.
Originals of a standard size (A3, B4, A4, A4R, B5,
B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-
1/2" x 11"R or 5-1/2" x 8-1/2R")) are set and the
auto paper select function is enabled.
READY TO SCAN FOR COPY.
1. A4 PLAIN
A4 2. A3 PLAIN
PLAIN 3. A3 PLAIN
4. A4 PLAIN
desired paper size selection key.
The selected key will be highlighted and the paper
selection screen will close. To close the paper
selection screen without making a selection, touch
the [PAPER SELECT] key.
The selected tray will be
highlighted or the
message "LOAD xxxxxx
PAPER." will appear. If
the message appears,
load paper in a paper
tray with paper of the
required size.
If originals of a size other
than the sizes above are
to be copied, manually
select the desired paper
size by touching the
[PAPER SELECT] key
and then touching the
4-7
4