Finisher; Part Names; Specifications - Olivetti d-Copia 3501 Operation Manual

FINISHER

The finisher can deliver collated sets either stapled or unstapled. Unstapled sets can be offset stacked from the
previous set for easy separation of the sets.

Part names

Latch
Release the latch to open the
finisher for misfeed removal.
Top cover
Open for misfeed
removal.
Staple box
Pull the box out to
replace the staple
cartridge or to
remove jammed
staples.
NOTES
● Do not put pressure on the finisher (particularly each tray).
● Do not place anything on the top cover. Doing so will interfere with the machine's paper handling during duplex
printing.
● The tray moves up and down during operation. Be careful not to impede its movement.
● The finisher requires the installation of other peripheral devices in order to be functional and cannot be installed
together with some other devices. The table on page 8-4 shows the configurations which are compatible.

Specifications

Name
Number of trays
Paper output
Tray type
Tray capacity
Paper sizes
Paper weight
Paper types
Tray full detection
Offset function
Paper sizes for stapling
Stapling capacity
Staples
Power supply
Dimensions
Weight
Specifications are subject to change for improvement without notice.
* When the top tray is extanded.
Supplies
SC1 staple cartridges must be used for this finisher. The cartridge
package contains three cartridges approx. 3000 staples each.
Finisher (AR-FN6)
2
Print face down
Top tray: normal tray, Lower tray: offset tray
Top tray: 500 sheets (A4 or 8-1/2" x 11" size, 80 g/m
Lower tray: 750 sheets (A4 or 8-1/2" x 11" size, 80 g/m
Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: Max. A4 or 8-1/2" x 11", Min. B5
Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: 60 to 128 g/m
2
Top tray: same as the specifications of paper for feeding in the main unit Lower tray:
plain paper only
Provided in both the top tray and the lower tray
Provided for the lower tray only. The offset amount is approx. 25 mm (1 inch)
A4, B5, and 8-1/2" x 11"
30 sheets* (A4 or 8-1/2" x 11" or smaller 80 g/m
*Up two sheets of cover stock (128 g/m
Single staple can be placed in the top left or lower left corners or two staples can be
centred on the left side
Supplied from machine
473 mm* (W) x 530 mm (D) x 508 mm (H) (18-5/8"* (W) x 20-7/8" (D) x 20" (H))
Approx. 21 kg (46.3 lbs.)
or 20 lbs.)
2
or 16 to 34 lbs.
or 20 lbs.)
2
or 34 lbs.) can be included.
2
Top tray
Printer, copier and fax
output can be delivered
here.
To print onto large paper
(A3, B4, 11" x 17", 8-1/2" x
14", or 8-1/2" x 13"),
extend the tray.
Offset tray
Stapled sets or sets to be
offset will be delivered
here.
or 20 lbs.)
2
3-7
3