Changing The Default Settings - Denon DVM-1800 Operating Instructions Manual

0

16 CHANGING THE DEFAULT SETTINGS

H The default values preset upon shipment from the factory can be changed.
The default settings are retained until they are agaln changed, even if the power is turned off.
In the stop mode, press the SET UP button.
The default setting screen appears.
l
1. Disc Languages
Use this to set the language to be used when playing the disc.
If the set language
language IS set.
2. Ratings
Use this to disable playback of adult DVDs so that children cannot
watch them. Note that playback of adult DVDs cannot be disabled If the
rating level is not recorded on the DVD, but that it is possible to disable
playback of all DVDs.
3. Menu Language
Use this to set the language
messages displayed on the TV screen ("PLAY", etc.).
1
4. On-Screen Messages
Use this to set whether or not to display messages ("PLAY",
the TV screen.
5. FL Display
Use this to set the brightness of the display.
6. TV Aspect
Set thts according to the size of the connected TV's screen (4:3 or 16:9).
7. Digital Audio Output
Use this to set the audio signals output from the digital audio output
connectors.
9. Other Settings
These include special
compression.
Use the A and 7 cursor buttons to select the desired setting, then press
the ENTER button.
Select "1 Disc Languages".
l
Select "2 Ratings".
l
Select "3 Menu Language".
2
l
Select "4 On-Screen Messages".
l
Select "5 FL Display".
l
Select "6 TV Aspect".
l
Select "7 Digital Audio Output".
l
Select "9 Other Settings".
l
NOTE:
When the player is set to the "Lock All" setting in "2 Ratings", none of the initial setting, including "2 Rating", can be changed if the DVD
l
disc is left inside the player. In this case, remove the disc, and then operate the player.
is not offered on that disc, the disc's
for the default setting
settings such as audio
(See page 44.)
(See pages 45, 46 and 47.)
(See page 48.)
(See page 49.)
(See page 51.)
(See page 52, 53 and 54.)
(See pages 55 and 56.)
(See pages 57 and 58.)
default
screen and
etc.) on
dynamic range
SET UP
%
Remote control unit
9 Other Settings
Press RETURN to
A
IENTER)
%
a
Remote control unit
ENTER
p-.
Remote control unit
43