HP Surestore Disk Array 12h - And FC60 Advanced User's Manual page 349

mstm — the Menu-based Interface
mstm is the menu-based STM interface. It serves as an alternate interface for systems that
do not support graphical displays.
The main mstm window displays a list of system resources. The Disk Array FC60 is
identified as product type "A5277A Array". See
one of the disk array controllers, which are identified by their hardware paths. Select the
entry for the disk array you will be testing.
In mstm, you traverse screens and menus, and select commands from pulldown menus,
which are similar to those found in xstm.
•
Navigating between screens. To navigate between one screen and another, use the
Tab key.
•
Navigating within screens. To navigate from one portion to another portion of the
same screen , use the Prev and Next keys (or, alternatively, the Cursor Up and Cursor
Down keys).
•
Navigating the menu bar. The following methods are used to navigate the menu bar:
– Position the cursor on the menu bar — Use the Tab key (or the MenuBar on/off
function key).
– Move to a particular pulldown menu — Use the cursor arrow keys.
– Expand a menu/sub-menu — Use the Return key.
– Highlight a command or sub-menu — Use the cursor keys.
– Perform a command — Use the Return key.
– Invoke a menu directly — Use Alt function key; then press nonunderlined character
in menu title.
– Activate a menu command/expand pulldown sub-menu — Press the letter that is
underlined in command or submenu.
For more information on navigating in mstm, download a copy of the STM Quick Reference
Guide from the Systems Hardware, Diagnostics, and Monitoring section of HP's Online
Documentation website (www.docs.hp.com/hpux/systems).
Figure 90. Each entry in the list represents
Support Tools Manager
349