Fans
Redundant, hot-swappable fans provide cooling for all enclosure components. Each fan has
two internal high-speed blowers (A in
screws (D).
A internal blowers
B LED
C pull tab
D locking screws
Figure 6
Fan
Internal circuitry senses blower motion and triggers a fault when the speed of either blower
falls below a critical level. If a fan failure occurs, the amber fault LED will go on. An alert
should also be generated by EMS Hardware Monitoring when a fan failure occurs.
Figure
6), an LED (B), a pull tab (C), and two locking
Disk Enclosure Components
31