Panasonic Palmcoder PV-D407 Operating Instructions Manual page 32

I,__/_Ta7 _JrbT=,'_lm H e &_
Great for amateur surveillance applications.
Motion Security recording may start
regardless of subject motion when...
• the background is plain, such as a white
wall.
• the Palmcorder is pointed at something
with distinct horizontal, vertical or oblique
stripes, such as a window shade.
• the brightness suddenly changes.
Motion Security recording may not start
when...
• motion is very slow or very fast.
- moving object is vary small.
• motion is in 1 comer of the viewing area.
• in low light situations (MOTION
SECURITY will flash if the light level is
inadequate.)
• the background has distinct horizontal or
vertical stripes.
• the background is plain, such as a white
wall.
32
Before you begin...
• Connect the Palmcorder to a power source.
For extended Palmcorder use, it is recom-
mended to use the AC Adaptor as a power
source.
• Insert a cassette with record tab (see page 10).
• Set the POWER switch to CAMERA.
• Aim Patmcorder at desired area.
l ln Record/Pause mode, hold down the
SECURITY MODE button for
approximately 2 seconds to place the
Palmcorder in Motion Security Stand-
By mode. (If no cassette tape is
inserted, "1"_," will flash.)
MOllON
SECURFfY
=T,tal_lrr
• Patmcorder will start recording
approximately 3 seconds after motion is
detected.
• If you display the date and time (see page
15), the date and time will also be
recorded.
MOTION Ar_ ]
SECURffY
• Recording will stop 30 seconds after the
motion ceases.
6")
_,# Press the SECURITY MODE button
once to cancel the Motion Security
feature.
Note:
• Make sure the Palmcorder is firmty secure. If
the Palmcorder is moved, the Motion Security
feature will start, regardless of the subject
being recorded.
• Palmcorder cannot be placed in the Motion
Security Stand-By mode during recording.
- Record!Pause, Stand-By mode, Digital EJ.S.,
CoLor Digita! Fade, One-Touch Auto Fade and
Negative/Positive Transposer can not be
activated while Patrncorder is in the Motion
Security Stand-By mode.