Panasonic Palmcoder PV-D407 Operating Instructions Manual page 13

The date and time is calculated, including
leap year, up to DEC 31 2095.
DISPLAY
\
Before you begin...
• Connect the Palmcorder to a power source.
• Set the POWERswitch to VCR or CAMERA,
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation,none of the CLOCK
SET UP/DOWN, (,A, I V) or DISPLAY buttons
are pressedwithin 30 seconds.
Press CLOCK SET UP • to display
the CLOCK SET menu.
Press UP • or DOWN • repeatedly
to select KJ ml=,_l =rJI h_l=l_,'l _ = II _[e/o
EXAMPLE
- o- C4J3GK SET---
_l.SNAiffr _ME ZONE
2.DAYUGNT _V]NG "rIME
Press DISPLAY to display the
DATE/TIME SETTING menu.
Press UP • or DOWN • repeatedly
(or hold down) to enter the desired
numbers, then press DISPLAY to fix
that portion and move on.
";6,'-00:00"PM-_¢_ 6":00.-00PM
J,_N 1 1 9"9_6 C_JAI_I J _ 1 996
Adjust the flashing digits for the hour,
minute, month, day, and year.
"1'2_0 O: 00_A'M"_
'A'N 1 1"996 l
ELE_"3":PUSH YI, L KL:Y |
ET : PUSH D_PLAY
When you finish setting the year, the
clock starts operating, and the CLOCK
SET menu appears.
To exit from the CLOCK SET menu,
press DOWN • to select I_, and
then press DISPLAY.
13