Panasonic Palmcoder PV-D407 Operating Instructions Manual page 30

LI,_t'_+I P',4rTt'iT_.
This feature allows you to increase the
magnification of the Power Zoom.
I_eTore you begin.,.
• Set the POWER switch to CAMERA,
Press the DIGITAL ZOOM button on
top of the Palmcorder to select
D ZOOM mode.
Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
Press and hold the "T" side of the
POWER ZOOM switch.
Digital Zoom engages when the Optical
Power Zoom reaches its maximum of
16×.
• Zoom level is displayed in the EVF
(22x maximum).
• Press the "1" or =W" side of the
POWER ZOOM switch to control the
digital zoom level.
• When the level falls below 16×, the
optical zooming function will resume.
• It the Digital E.I.S. feature is activated
(see page 31) the maximum Digffal
Zoom ratio will be 20×.
Press DIGITAL ZOOM
until no indication appears in the EVF
to turn the Digital Zoom feature off.
(The zoom ratio will adjust to 16x,)
(refer to page 26 for normal zoom
operation )
30