Related
debug cpu-traffic-stats
Commands
show debugging
Displays a list of all enabled debugging processes.
Syntax
show debugging
Command Mode
EXEC Privilege
Command
Version 8.3.17.0
History
Example
Figure 5-8. show debugging Command Example
FTOS#show debug
Generic IP:
OSPF:1
DHCP:
FTOS#
show diag
Displays the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]] | testcase}
Parameters
information
stack-unit unit-id
detail
summary
testcase
Defaults
Summary
Command Modes
EXEC Privilege
Enables CPU traffic statistics for debugging.
Supported on M I/O Aggregator
(Access List: test)
IP packet debugging is on for
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF packet debugging is on
DHCP debugging is on
Enter the keyword
in the system.
(OPTIONAL) Enter the keyword
information on a specific stack member. Range: 0 to 5.
(OPTIONAL) Enter the keyword
information.
(OPTIONAL) Enter the keyword
diagnostics information.
Enter the keyword
in the system.
(Access List: test)
information
to view current diagnostics information
stack-unit
detail
to view detailed diagnostics
summary
testcase
to view current diagnostics testcases available
unit-id
followed by the
to display
to view a summary of the
Control and Monitoring | 53