Show Ip Igmp Interface; Show Ip Igmp Snooping Mrouter - Dell PowerEdge M I/O Aggregator Reference Manual

show ip igmp interface

Syntax
Parameters
Command Modes
Command
History
Example

show ip igmp snooping mrouter

Syntax
Parameters
124 | Internet Group Management Protocol (IGMP)
View information on the interfaces participating in IGMP.
show ip igmp interface [interface]
interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear
counters from a specified interface:
• For a Port Channel interface, enter the keyword
number. Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a VLAN, enter the keyword
EXEC
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 10-2. show ip igmp snooping mrouter Command Example
FTOS#show ip igmp interface
Vlan 2 is up, line protocol is down
Inbound IGMP access group is not set
Interface IGMP group join rate limit is not set
IGMP snooping is enabled on interface
IGMP Snooping query interval is 60 seconds
IGMP Snooping querier timeout is 125 seconds
IGMP Snooping last member query response interval is 1000 ms
IGMP snooping fast-leave is disabled on this interface
IGMP snooping querier is disabled on this interface
Vlan 3 is up, line protocol is down
Inbound IGMP access group is not set
Interface IGMP group join rate limit is not set
IGMP snooping is enabled on interface
IGMP Snooping query interval is 60 seconds
IGMP Snooping querier timeout is 125 seconds
IGMP Snooping last member query response interval is 1000 ms
IGMP snooping fast-leave is disabled on this interface
IGMP snooping querier is disabled on this interface
--More--
Displays multicast router interfaces.
show ip igmp snooping mrouter
vlan number Enter the keyword vlan followed by the vlan number.
Range: 1 to 4094
vlan
followed by a number from 1 to 4094.
[ vlan number ]
port-channel
followed by a
TenGigabitEthernet