Connecting To Video Equipment - Sharp Notevision PG-M25X Operation Manual

Connecting to Video Equipment

Connecting to
Component Video
Equipment
Use a 3 RCA to 15-pin D-sub cable and DVI to
15-pin D-sub adaptor when connecting to the
INPUT 1 terminal, component video equipment
such as DVD players and DTV* decoders.
* DTV is the umbrella term used to describe
the new digital television system in the United
States.
1
Connect the 3 RCA to 15-pin D-
sub cable using the DVI to 15-
pin D-sub adaptor.
2
Use the above cables to con-
nect the projector and the
video equipment.
3
Connect the projector and the
video equipment using a ø3.5
mm to RCA audio cable
(commercially available).
Note
• When connecting the projector to the
video equipment in this way, select "Com-
ponent" for "Signal Type" in the "Picture"
menu. See page 59.
• A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
Optional
accessories
DVD player or
3
ø3.5 mm to RCA audio
DTV* decoder
cable (commercially
available)
1
DVI to 15-pin
D-sub adaptor
(sold separately)
3RCA to 15-pin
D-sub cable
Type: AN-C3CP
(9'10" (3.0 m))
DVI to 15-pin
D-sub adaptor
Model: AN-A1DV
(7.9" (20 cm))
To analog component
output terminal
To audio output terminal
2
3 RCA to 15-pin
D-sub cable
(sold separately)
-29