Selecting The Power Save Mode; Setting The Power Save Mode; Automatic Power Shutoff Function - Sharp Notevision PG-M25X Operation Manual

Selecting the Power Save Mode

The Power Save Mode or the Automatic Power Shutoff function allows you to reduce the
power consumption of the projector.
Setting the Power Save
Mode
Select "Power Save" in the "Options (1)"
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Description of Power Save Modes
Quantity of light is 80%.
ON
Power consumption is 255W.
Quantity of light is 100%.
OFF
Power consumption is 295W.
Note
• It is set to "OFF" normally.
• "Power Save" mode is factory preset to
"OFF".
• When setting the power save mode to
"ON", the projected images become dark.
Automatic Power
Shutoff Function
If this is set to " (On)" and no action is per-
formed for more than 15 minutes, and in the
following cases, the power will turn automati-
cally off.
• When selecting INPUT 1 to 3: If the input
signal cannot be detected.
• When selecting INPUT 4: If there is no card.
The Auto Power Off function will be disabled
when it has been set to "
Select "Auto Power Off" in the "Options
(1)" menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• When the Auto Power Off function is set
to " (On)", 5 minutes before the power
turns off, the message "Power OFF in X
min." will appear on the screen to indicate
the remaining minutes.
(Off)".
-87