Using A Wireless Lan Pc Card; Installing A Wireless Lan Pc Card; Ejecting The Card - Sharp Notevision PG-M25X Operation Manual

Using a Wireless LAN PC Card

Inserting a wireless LAN PC card into the INPUT 4 PC card slot on the projector allows you to receive images to the
projector and project them via a wireless connection.
Installing a Wireless
LAN PC Card
1
Insert the wireless LAN PC
card into the INPUT 4 PC card
slot on the projector.
• For details on how to install the card,
see page 31.
• When the card is inserted, the input
will automatically change to INPUT 4.
Info
• Make sure to turn on the projector first, when
receiving images in the projector using a wire-
less LAN PC card. When "Standby" is dis-
played on the screen, turn on the computer.
Note
• See
page 75 when installing a memory
card in the projector.
• Installation should be done after "Standby" is
displayed in the lower right corner of the screen.

Ejecting the Card

Make sure to perform the following pro-
cedures before removing the card. Se-
lect "Eject PC Card" in the Card menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Select "Eject PC Card" and press
• After a few seconds, the message "You may
safely eject the PC Card." will be displayed.
2
Remove the card.
• Remove the card after the message
is displayed.
• For details on how to remove the card,
see page 31.
Info
• If the card is removed without selecting
"Eject PC Card" in step 1 above, the data
stored on the PC card may be lost, or the
PC card may be damaged.
• When moving the projector, make sure to
eject the PC card and that the Eject button is
pressed all the way in. If moved with the Eject
button out, the projector may be damaged.
68
-68
.