The Gyroremote; Inserting The Batteries; Replacing The Batteries - Sharp Notevision PG-M25X Operation Manual

The GyroRemote

Inserting the Batteries

The batteries (four R-03 batteries ("AAA" size, UM/
SUM-4, HP-16 or similar)) are included in the package.
1
Slide the cover in the direction
of the arrow to open it.
2
Insert the included batteries.
• Insert the batteries making sure the po-
larities correctly match the
marks inside the battery compartment.
Info
• When inserting the batteries into the battery com-
partment of the GyroRemote, make sure that the
batteries are placed over the pullstring for easy re-
moval in the future.
If not, it may be difficult to remove old batteries when
they have to be replaced.
3
Slide the cover in the direction
of the arrow to close it.
Note
• GyroRemote Sleep Function
To avoid battery consumption, the GyroRemote
automatically enters the Sleep mode if not action
takes place within 5 minutes. If the GyroRemote
cannot be operated, press once
GyroRemote to resume operation.

Replacing the Batteries

The LED indicator will blink when the
batteries need to be replaced.
• Make sure to replace the batteries with new
batteries as soon as possible when the LED
indicator starts to blink.
• Be sure to use alkaline batteries.
Note
• If GyroRemote is idle for five minutes, it will go
into sleep mode to conserve battery life. Press-
ing any button will make GyroRemote up.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
• Insert the batteries making sure the polarities correctly match the
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove them using a cloth.
• The batteries included with this projector may be exhausted over a short period, depending on how they are kept. Be sure to
replace them as soon as possible with new batteries.
• Remove the batteries from the GyroRemote if you will not be using the remote control for a long time.
and
on the
and
Pullstring for
removing the
batteries
marks inside the battery compartment.
LED
indicator
-17