Using A Memory Card; Displaying Of The Contents In The Card As An Index; Ejecting The Card - Sharp Notevision PG-M25X Operation Manual

Using a Memory Card

When a memory card is installed, images stored in the memory card can be projected.
If presentation files are stored in the memory card you can make presentations using only
the projector and the memory card, without having to use a computer.
Displaying of the Contents
in the Card as an Index
1
Insert the memory card into the IN-
PUT 4 PC card slot on the projector.
• For details on installing the card, see
page 31.
• The files stored in the card will be dis-
played as an index (Index mode). How-
ever, Autorun will function when Autorun
has been set to "
Slide Show" (page
Note
• For details about the memory cards that
can be used, see page
• For details about the display format of the
Index mode, see pages 76
• For details on how to install the wireless
LAN PC card in the projector, see
• The following are the files that this projec-
tor can handle.
Non-compressed Bitmap (.BMP)
JPEG files (.JPEG / .JPG)
Non-compressed TIFF files (.TIFF / .TIF)
VQ files (.VQ)
Script files (.SSF)
• The file names will be displayed in 8 characters
with their extensions (3 characters).

Ejecting the Card

Make sure to perform the following procedures
before removing the card.
Note
• If the card is removed without performing
these procedures, the data stored on the
card may be lost.
Select "Eject PC card" in the Card menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Info
• Before removing the PC card, make sure
to select "Eject PC Card" in the Card menu.
• If the card is removed without selecting
"Eject PC Card" in step 1 above, the data
stored on the memory card may be lost,
or the PC card may be damaged.
Script Files" or "
79).
121.
and 77.
page 68.
-75